Establishing secure connection… Loading editor… Preparing document…
Navigation

Fill and Sign the County State of Utah and Described as Follows Form

Fill and Sign the County State of Utah and Described as Follows Form

How it works

Open the document and fill out all its fields.
Apply your legally-binding eSignature.
Save and invite other recipients to sign it.

Rate template

4.6
66 votes
STATE OF UTAHCOUNTY OF ____________________ TIMBER SALE CONTRACT KNOW ALL MEN BY THESE PRESENTS, that this contract made and entered into this day by and BETWEEN ____________________________ _______________________________________ or _________________, ________________________, a ____________________________ corporation, hereinafter referred to as the "Seller(s),” whether one or more, and _________ ___________________________________ or ______________________ __________________________, a ____________________________ corporation, hereinafter referred to as the "Purchaser(s)," whether one or more, WITNESSETH: That the said Seller, for and in consideration of the sum of Ten and no/100 Dollars and other considerations paid by the said Purchaser, the receipt of which is hereby acknowledged, has granted, bargained, sold and conveyed, and do by these presents hereby grant, bargain, sell, and convey unto the said Purchaser all merchantable timber on their property located in _____________________ County, State of Utah, and described as follows: DESCRIPTION OF PROPERTYSource of Title: DB _________, Pg ______ TO HAVE AND TO HOLD the same unto the said Purchaser, his successors and assigns, together with the following described rights, powers, and privileges, and subject to the following conditions, limitations, and reverter, that is to say:1. The right to enter upon said lands from the execution of the timber deed until ___________________________, except when extremely wet conditions exist which may result in excessive damage to the roads and residual stand of timber, to cut, haul, handle, manufacture, and remove from said lands the said timber hereby conveyed, together with the products thereof, which shall include all rights of ingress, egress, and regress on, over, and across said lands owned by the said Seller, necessary for said purposes.2.The right to use all roads over and across said lands, with the right to lay-out, construct bunching areas, and use such other and additional roads as designated by representatives of both Parties as may be necessary in and about the cutting, hauling, manufacturing, and removing of the said trees and timber hereby conveyed, together with all other rights, privileges, and easements which may be useful in exercising the provisions of this contract. 3.The Purchaser, for himself and for his successors and assigns, agrees that in and about the cutting, hauling, handling, manufacturing, and removing of said timber and the products thereof, and in exercising the rights, powers, privileges and immunities granted herein, to do so in accordance with Management Practices as attached (See Exhibit “A”), or in accordance with Management Practices established by the State of Utah, and in accordance with good timber cutting practices, by removing the top and limbs from the main tree bole before it is skidded to a bunching area; and not carelessly to injure or damage the remaining timber; and not to damage the fields, pastures, fences, roads, ditches, bridges, or wildlife food plots; and to remove tops, limbs, debris, and garbage from the property lines, fields, pastures, roads, ditches, and bunching grounds on or over said above-described lands to which the Purchaser has the right of ingress and egress; but, if he, or his successors and assigns, does so, he agrees immediately to repair fences and bridges; remove tops and litter from property lines, fields, pastures, roads, ditches, and bunching grounds; and, upon completion of the cutting, to repair the roads to as good or better conditions as exists prior to the cutting. Furthermore, it is agreed and understood that those roads crossing other landowners and used for removing timber products included in this contract, shall be covered under all of the provisions outlined in this contract. 4. It is understood and agreed and made a part of this contract that all of the rights, powers, and privileges herein given and granted shall terminate and be at the end at midnight on ___________________________ and that all of the trees and timber hereby conveyed, whether standing or fallen, which remain on said lands after said date shall immediately revert to and become the property of the undersigned grantors and their successors in title.5.The Purchaser agrees to notify the Agent of the Seller, ___________________________. or its representatives, five days prior to entering the property.6. Upon the execution of this contract, Purchaser has deposited with Seller a Cashier’s check in the amount of $___________________, which check is made payable to _______________________________. After the expiration of the contract or the release of the rights hereunder and a final inspection of the harvesting made jointly by the Purchaser and the Seller or his agent, if Purchaser shall have complied with all of its obligations under the terms and provisions of this contract, and shall not have caused any damage to the property of the Seller, Seller or his agents shall return said deposit to Purchaser. However, if Purchaser has caused any unnecessary damage to any property of Seller or has caused any loss, liability, or expense to Seller by reason of any violation of this contract, Seller or his Agent may make a written statement of the amount of such damage, loss, expense or liability, give notice of the same to Purchaser and retain from the proceeds of said check the amount of such statement of damage, loss, expense, or liability. If the aggregate amount of such statement of damage shall be less than the amount of said check, then the remaining balance of the check shall be paid to Purchaser by Seller. If the amount of such statement shall exceed the amount of said check, the Seller may retain all of the proceeds of said check and Purchaser shall pay Seller an amount equal to the excess of said statement. It is understood and agreed that the Purchaser pay to the Seller for any sawtimber trees cut that are not sold according to this contract at the rate of $_______________ per M.B.F. (Doyle Scale) for pine sawtimber and $_____________ per M.B.F. (Doyle Scale) for hardwood sawtimber. It is further understood that the Purchaser pay to the Seller for any pulpwood trees cut that are not sold according to this contract at the rate of $__________ per cord for pine or hardwood pulpwood. 7.All of Purchaser’s operations hereunder shall be at Purchaser’s own expense and by means of Purchaser’s own selection, and shall be exclusively at the risk and responsibility of Purchaser; and Seller shall have no liability either directly or indirectly on account of Purchaser’s operations. Purchaser shall indemnify and hold harmless the Seller against any loss, liability, or expense of any kind incurred on account of personal injury, death, or property damage which may arise (or may be alleged to have arisen) from any operations hereunder by Purchaser or Purchaser’s contractors, employees, agents, or representatives attributable to negligence or other fault on the part of the Purchaser or Purchaser’s officers, agents, employees, or subcontractors. Purchaser acknowledges that the provisions of this sentence were specifically bargained for between Purchaser and Seller. Purchaser shall pay all severance taxes and all other taxes, licenses, and excises required by law to be paid on account of the timber felling and logging operations hereunder. And for the same consideration as expressed hereinabove, the said Sellers do hereby covenant with the said Purchaser, his successors and assigns, that they are seized of an indefeasible title in fee simple to the timber and rights and privileges herein granted; that they have a good and lawful right to sell and convey the same; and, that they will warrant and forever defend the title thereto, subject to the conditions and limitations expressed herein. 8.Endangered Species Clause - BUYER and SELLER take cognizance of the Federal Endangered Species Act. 16 U.S.C. Section 1531 et seq., and the regulations appearing at 50 C.F.R. Section 17, which list endangered and threatened fish, wildlife, and plants, including but not limited to the gopher tortoise, (Goperus Polyphemus). Red-Cockaded Woodpecker (Picoides), the Utah Black Bear, and such other species of wildlife, fish, and plants which may from time to time be listed as threatened or endangered. SELLER and SELLER’s AGENT represents that there are no threatened or endangered species of first, wildlife, or plants, or habitat therefore on any of the land subject to this agreement to the best of SELLER’s knowledge. SELLER and BUYER agree that should the presence of any threatened or endangered species or evidence of habitation thereof be found on any of the acreage and the thereon (as is determined by BUYER in consultation with applicable authorities of agencies) and BUYER shall be compensated or excused from payment as the case may be for the prorated portion of the purchase price which relates to the affected acreage.Given under our hands and seals this the ______ day of __________________________, 20________. __________________________________ ______________________________WitnessPurchaser (if individual)______________________________________________________________________________________________________Witness____________________________________________________________________ ________________________________________________________________WitnessPurchaser (if individual)______________________________________________________________________________________________________Witness______________________________________________________________________________________________________ ______________________________WitnessPurchaser (if corporation)__________________________________ BY:____________________________________________________________Its_____________________________________________________________Witness____________________________________________________________________________________________________________________________________WitnessSeller (if individual)______________________________________________________________________________________________________Witness____________________________________________________________________________________________________________________________________WitnessSeller (if individual)______________________________________________________________________________________________________Witness____________________________________________________________________________________________________________________________________WitnessSeller (if corporation) __________________________________BY:____________________________________________________________Its_____________________________________________________________Witness____________________________________________________________________ Acknowledgment for Individual – Purchaser(s) STATE OF ______________________COUNTY OF ____________________On the _____ day of ___________________ , ______ , personally appeared before me _______________________________ , Purchaser(s) and the signer(s) of the foregoing instrument, who duly acknowledged to me that he/she/they executed the same.(Seal) ________________________________Notary Public, State of Printed Name: ____________________ My Commission Expires: _____________________Residing at:_____________________________ Acknowledgment for Corporation - Purchaser STATE OF _______________________ COUNTY OF _____________________On the ____ day of _______________________ , _______ , personally appeared before me ___________________________ ,who being duly sworn, did say that he/she is the _____________________ of ________________________ , a corporation, Purchaser, and that said instrument was signed in behalf of said corporation by authority of a resolution of its Board of Directors, and said ________________________ acknowledged to me that said corporation executed the same. (Seal) ________________________________Notary Public, State of Printed Name: ____________________ My Commission Expires: _____________________Residing at:_____________________________ Acknowledgment for Individual – Seller(s) STATE OF ______________________COUNTY OF ____________________On the _____ day of ___________________ , ______ , personally appeared before me _______________________________ , Seller(s) and the signer(s) of the foregoing instrument, who duly acknowledged to me that he/she/they executed the same.(Seal) ________________________________Notary Public, State of Printed Name: ____________________ My Commission Expires: _____________________Residing at:_____________________________ Acknowledgment for Corporation - Seller STATE OF _______________________ COUNTY OF _____________________On the ____ day of _______________________ , _______ , personally appeared before me ___________________________ ,who being duly sworn, did say that he/she is the _____________________ of ________________________ , a corporation, Seller, and that said instrument was signed in behalf of said corporation by authority of a resolution of its Board of Directors, and said ________________________ acknowledged to me that said corporation executed the same.(Seal) _______________________________Notary Public, State of Printed Name: ____________________ My Commission Expires: _____________________Residing at:_____________________________ EXHIBIT “A” Management Practices STREAMSIDE MANAGEMENT ZONES Forest lands within the area immediately adjacent to waters of the State should be managed with specific attention given to measures that can be taken to protect both instream and downstream water quality values. The most important consideration within this zone is that of protecting the integrity of the streambed and streambanks. It does, however, require careful removal of overstory vegetation to insure protection of understory vegetation. The width of Streamside Management Zones should be varied, depending on the following conditions: slope of land, soil erodibility, precipitation, knowledge of particular area, sensitivity of stream, etc.Generally, the steeper the slope the wider the SMZ, and the more gentle the slope the narrower the SMZ. The same holds true for erodible soils: the more erodible the soil the wider the SMZ, and the less erodible the soil the narrower the SMZ. PERMANENT ROADS 1. Roads should be carefully planned.2.Avoid locations in narrow canyons, marshes, wet meadows and Streamside Management Zones if there is another practical route.3.Minimize the number of stream crossings.4. Roads designed for stability with adequate drainage.5.Except at crossings, locate roads as far as practical from streams.6.Standing water on a road increases operating costs and is a source of sediment which could be delivered to a stream.7.As slope increases, diversion structures become more important for reducing the damages caused by soil erosion.Construction of Permanent Roads1.Use the minimum design standard consistent with the anticipated traffic and reasonable safety.2.Stumps, logs, and slash should not be covered with fill material and incorporated into road beds.3.Minimizing the amount of soil exposed will minimize soil erosion.4.Road slopes should be determined by topography and soil type. 5.Ditches, adequate culverts, drainage dips, water bars, cross drains, etc., should be installed concurrent with construction.6.Diversion or wing ditches should be used to carry road drainage water. They should empty onto the undisturbed forest floor.7.Except at crossings, sidecast of fill material should not be placed below the ordinary high water mark of a stream.8.The exposed soil on the side banks of roads is a source of erosion and road deterioration. Stabilizing the side banks as they are constructed will minimize the problem. Maintenance of Permanent Roads 1.Regular periodic inspection.2.Drainage devices should be kept open.3.Back slopes and/or roadbeds may be seeded.4.Special soil stabilizing materials are available for particularly vulnerable areas.5. Roads which have a high potential for erosion may be closed to non-essential traffic during wet weather. WATER CROSSINGS 1.Use fords only if stream beds are solid and if the installation of bridges and culverts will accelerate soil movement.2.Bridges and overflow culverts should be constructed to minimize changes in natural stream beds during high water.3.Culverts on perennial streams should be installed low enough to allow passage of aquatic life during low water.4. Dirt fills for bridge approaches should be protected from erosion.5.Slash and/or construction debris should be removed from streams.6.Open top culverts, water bars, or broad based dips placed in the road on either side of the stream crossing will minimize water movement down the road and into the stream. TRAILS 1.The basic principals set forth under Permanent Roads should be applied to Permanent Trails: however, techniques should be altered as appropriate. HARVESTING Temporary Access Roads and Landings1.The location of temporary access roads (logging roads) should be planned before operations begin.2.Road construction should be kept to a minimum.3.Landings should be located to minimize the adverse impact of skidding on the natural drainage pattern.4.Logging roads and landings should be located on firm ground, outside of Streamside Management Zones and above the ordinary high water mark of streams. 5.Landings should be kept as small in area as possible.6.When operations are completed, provisions should be made to divert water run-off from the landings and roads. Felling 1. Careful felling can minimize the impact of subsequent phases of logging operations.2.Trees should not be felled into streams, except where no safe alternative exists. In the latter case, such trees should be removed promptly. Skidding 1.Timber cut in Streamside Management Zones should be removed by the method which causes the least damage.2.Skidding should be done so as to avoid disrupting natural drainage and to prevent excessive soil displacement.3. Stream channels should not be used as skid trails.4. Crossings of streams should be minimized. Where crossing is necessary, logs should be moved at right angles to the channel.5.Temporary crossings utilizing culverts, logs or portable bridges may be required. These should be removed promptly upon completion of use.6.Skid trails on steep slopes should have occasional breaks, should be water barred.7. If harvesting must be done during wet weather it is better to log on well-drained sites. Soils are more easily compacted when wet.8. Litter from the maintenance and repair of equipment should be kept out of streams and preferably should be buried or hauled to legal dumping sites.9.Servicing of equipment involving fuel, lubricants, or coolants should be performed in places where these materials cannot enter streams.10.Upon completion of logging, erosion-prone areas can be mulched or seeded. MECHANICAL SITE PREPARATION 1.Avoid excessive soil compaction.2.Minimize erosion and the movement of sediment into waters.3.Prevent accumulation of debris in ponds, streams or rivers.4.Minimize disturbance in Streamside Management Zones.5.Windrows, disking, bedding and planting with “furrow” type mechanical planters should follow contours.6.Soil disturbance during shearing and raking operations should be kept to a practical minimum.7.Shearing and Chopping blades should be kept sharp.8.Avoid complete disking of steep slopes with extremely erodible soil.9.If breaks in bedding occur on slopes, they should be stabilized.10.Wherever possible, discharge water from furrows and disked areas onto vegetated surfaces.11. Plant trees on contour. FOREST CHEMICALS 1.BMPs are to use these products in accordance with the manufacturer’s instructions and state and federal regulations. No containers or equipment should be washed in any stream.2.Lines located at right angles to the contour should be avoided. Grades, ditches and water bars should be planned and installed when the line is being constructed.3. Plowing deep lines with a fire-line plow should be avoided unless necessary.4. Plowed or dozed lines should never be led directly into a stream or swamp. PRESCRIBED FIRE 1. Most soil erosion problems arising from prescribed burning come from fire lines being improperly installed.2. Lines located at right angles to the contour should be avoided. Grades, ditches and water bars should be planned and installed when the line is being constructed.3. Plowing deep lines with a fire-line plow should be avoided unless necessary.4. Plowed or dozed lines should never be led directly into a stream or swamp.

Valuable advice on finalizing your ‘County State Of Utah And Described As Follows’ online

Are you fed up with the inconvenience of handling paperwork? Look no further than airSlate SignNow, the premier electronic signing solution for individuals and enterprises. Bid farewell to the tedious task of printing and scanning documents. With airSlate SignNow, you can effortlessly complete and validate paperwork online. Utilize the extensive features included in this user-friendly and affordable platform and transform your document management strategy. Whether you need to validate forms or collect electronic signatures, airSlate SignNow facilitates everything smoothly, needing only a few clicks.

Adhere to this straightforward guide:

  1. Access your account or initiate a complimentary trial with our service.
  2. Select +Create to upload a document from your device, cloud storage, or our template repository.
  3. Open your ‘County State Of Utah And Described As Follows’ in the editor.
  4. Click Me (Fill Out Now) to finalize the form on your end.
  5. Add and designate fillable fields for others (if necessary).
  6. Proceed with the Send Invite settings to request eSignatures from additional individuals.
  7. Download, print your version, or convert it into a reusable template.

No need to worry if you have to collaborate with your colleagues on your County State Of Utah And Described As Follows or send it for notarization—our service provides everything you require to accomplish such objectives. Register with airSlate SignNow today and elevate your document management to new levels!

Here is a list of the most common customer questions. If you can’t find an answer to your question, please don’t hesitate to reach out to us.

Need help? Contact Support
Utah counties Map
Counties of Utah
How many counties in Utah
Counties in Utah alphabetical order
Utah counties by population
Utah counties by size
Utah counties and cities
Largest county in Utah

The best way to complete and sign your county state of utah and described as follows form

Save time on document management with airSlate SignNow and get your county state of utah and described as follows form eSigned quickly from anywhere with our fully compliant eSignature tool.

How to Sign a PDF Online How to Sign a PDF Online

How to complete and sign paperwork online

In the past, dealing with paperwork required pretty much time and effort. But with airSlate SignNow, document management is quick and simple. Our robust and user-friendly eSignature solution allows you to effortlessly fill out and electronically sign your county state of utah and described as follows form online from any internet-connected device.

Follow the step-by-step guidelines to eSign your county state of utah and described as follows form template online:

  • 1.Sign up for a free trial with airSlate SignNow or log in to your account with password credentials or SSO authorization option.
  • 2.Click Upload or Create and add a file for eSigning from your device, the cloud, or our form library.
  • 3.Click on the document name to open it in the editor and utilize the left-side toolbar to fill out all the blank fields accordingly.
  • 4.Place the My Signature field where you need to approve your sample. Provide your name, draw, or import a photo of your regular signature.
  • 5.Click Save and Close to finish modifying your completed form.

As soon as your county state of utah and described as follows form template is ready, download it to your device, save it to the cloud, or invite other parties to eSign it. With airSlate SignNow, the eSigning process only takes a couple of clicks. Use our robust eSignature tool wherever you are to handle your paperwork effectively!

How to Sign a PDF Using Google Chrome How to Sign a PDF Using Google Chrome

How to fill out and sign paperwork in Google Chrome

Completing and signing documents is simple with the airSlate SignNow extension for Google Chrome. Installing it to your browser is a quick and efficient way to deal with your forms online. Sign your county state of utah and described as follows form template with a legally-binding eSignature in just a few clicks without switching between tools and tabs.

Follow the step-by-step guide to eSign your county state of utah and described as follows form template in Google Chrome:

  • 1.Go to the Chrome Web Store, locate the airSlate SignNow extension for Chrome, and add it to your browser.
  • 2.Right-click on the link to a form you need to eSign and select Open in airSlate SignNow.
  • 3.Log in to your account with your password or Google/Facebook sign-in buttons. If you don’t have one, sign up for a free trial.
  • 4.Use the Edit & Sign menu on the left to complete your sample, then drag and drop the My Signature field.
  • 5.Insert a photo of your handwritten signature, draw it, or simply type in your full name to eSign.
  • 6.Verify all the details are correct and click Save and Close to finish modifying your paperwork.

Now, you can save your county state of utah and described as follows form sample to your device or cloud storage, email the copy to other people, or invite them to eSign your form via an email request or a protected Signing Link. The airSlate SignNow extension for Google Chrome enhances your document processes with minimum effort and time. Try airSlate SignNow today!

How to Sign a PDF in Gmail How to Sign a PDF in Gmail How to Sign a PDF in Gmail

How to fill out and sign documents in Gmail

Every time you get an email with the county state of utah and described as follows form for approval, there’s no need to print and scan a file or save and re-upload it to another program. There’s a better solution if you use Gmail. Try the airSlate SignNow add-on to rapidly eSign any paperwork right from your inbox.

Follow the step-by-step guide to eSign your county state of utah and described as follows form in Gmail:

  • 1.Navigate to the Google Workplace Marketplace and locate a airSlate SignNow add-on for Gmail.
  • 2.Install the tool with a related button and grant the tool access to your Google account.
  • 3.Open an email with an attached file that needs signing and utilize the S key on the right panel to launch the add-on.
  • 4.Log in to your airSlate SignNow account. Select Send to Sign to forward the file to other parties for approval or click Upload to open it in the editor.
  • 5.Put the My Signature option where you need to eSign: type, draw, or import your signature.

This eSigning process saves efforts and only requires a couple of clicks. Take advantage of the airSlate SignNow add-on for Gmail to update your county state of utah and described as follows form with fillable fields, sign documents legally, and invite other parties to eSign them al without leaving your mailbox. Boost your signature workflows now!

How to Sign a PDF on a Mobile Device How to Sign a PDF on a Mobile Device How to Sign a PDF on a Mobile Device

How to complete and sign forms in a mobile browser

Need to quickly complete and sign your county state of utah and described as follows form on a smartphone while doing your work on the go? airSlate SignNow can help without the need to install additional software apps. Open our airSlate SignNow tool from any browser on your mobile device and add legally-binding electronic signatures on the go, 24/7.

Follow the step-by-step guidelines to eSign your county state of utah and described as follows form in a browser:

  • 1.Open any browser on your device and follow the link www.signnow.com
  • 2.Sign up for an account with a free trial or log in with your password credentials or SSO authentication.
  • 3.Click Upload or Create and import a file that needs to be completed from a cloud, your device, or our form collection with ready-made templates.
  • 4.Open the form and fill out the blank fields with tools from Edit & Sign menu on the left.
  • 5.Put the My Signature area to the sample, then type in your name, draw, or add your signature.

In a few simple clicks, your county state of utah and described as follows form is completed from wherever you are. When you're done with editing, you can save the document on your device, generate a reusable template for it, email it to other people, or invite them eSign it. Make your paperwork on the go prompt and efficient with airSlate SignNow!

How to Sign a PDF on iPhone How to Sign a PDF on iPhone

How to fill out and sign documents on iOS

In today’s corporate environment, tasks must be done quickly even when you’re away from your computer. With the airSlate SignNow application, you can organize your paperwork and approve your county state of utah and described as follows form with a legally-binding eSignature right on your iPhone or iPad. Set it up on your device to close deals and manage forms from just about anywhere 24/7.

Follow the step-by-step guide to eSign your county state of utah and described as follows form on iOS devices:

  • 1.Open the App Store, find the airSlate SignNow app by airSlate, and install it on your device.
  • 2.Launch the application, tap Create to upload a form, and select Myself.
  • 3.Opt for Signature at the bottom toolbar and simply draw your signature with a finger or stylus to eSign the sample.
  • 4.Tap Done -> Save right after signing the sample.
  • 5.Tap Save or use the Make Template option to re-use this document later on.

This process is so easy your county state of utah and described as follows form is completed and signed within a few taps. The airSlate SignNow application works in the cloud so all the forms on your mobile device are kept in your account and are available any time you need them. Use airSlate SignNow for iOS to boost your document management and eSignature workflows!

How to Sign a PDF on Android How to Sign a PDF on Android

How to complete and sign forms on Android

With airSlate SignNow, it’s simple to sign your county state of utah and described as follows form on the go. Install its mobile app for Android OS on your device and start boosting eSignature workflows right on your smartphone or tablet.

Follow the step-by-step guidelines to eSign your county state of utah and described as follows form on Android:

  • 1.Go to Google Play, find the airSlate SignNow app from airSlate, and install it on your device.
  • 2.Log in to your account or register it with a free trial, then add a file with a ➕ option on the bottom of you screen.
  • 3.Tap on the imported file and select Open in Editor from the dropdown menu.
  • 4.Tap on Tools tab -> Signature, then draw or type your name to eSign the form. Complete empty fields with other tools on the bottom if required.
  • 5.Utilize the ✔ key, then tap on the Save option to end up with editing.

With a user-friendly interface and full compliance with main eSignature laws and regulations, the airSlate SignNow application is the perfect tool for signing your county state of utah and described as follows form. It even operates without internet and updates all form modifications once your internet connection is restored and the tool is synced. Fill out and eSign forms, send them for approval, and generate multi-usable templates anytime and from anyplace with airSlate SignNow.

Sign up and try County state of utah and described as follows form
  • Close deals faster
  • Improve productivity
  • Delight customers
  • Increase revenue
  • Save time & money
  • Reduce payment cycles