Fill and Sign the Keeping Kids Safe Curriculum Form

K2 Dyno Replay System Quick Start Guide SOFTWARE VERSION 1.1 071-8681-00 June 2009 Affiliate with the N.V. KEMA in The Netherlands CERTIFICATE Certificate Number: 510040.001 The Quality System of: Grass Valley, Inc. 400 Providence Mine Road Nevada City, CA 95945 United States 15655 SW Greystone Ct. Beaverton, OR 97006 United States 10 Presidential Way rd 3 Floor, Suite 300 Woburn, MA 01801 United States Nederland B.V. 4800 RP BREDA The Netherlands Weiterstadt, Germany Brunnenweg 9 D-64331 Weiterstadt Germany Rennes, France Rue du Clos Courtel Cesson-Sevigne, Cedex France Technopole Brest Iroise CS 73808 29238 Brest Cedex 3 France 17 rue du Petit Albi-BP 8244 95801 Cergy Pontoise Cergy, France 2300 South Decker Lake Blvd. Salt Lake City, UT 84119 United States 7140 Baymeadows Way Suite 101 Jacksonville, FL 32256 United States Including its implementation, meets the requirements of the standard: ISO 9001:2000 Scope: The design, manufacture and support of video hardware and software products and related systems. This Certificate is valid until: This Certificate is valid as of: Certified for the first time: June 14, 2009 August 30, 2006 June 14, 2000 H. Pierre Sallé President KEMA-Registered Quality The method of operation for quality certification is defined in the KEMA General Terms And Conditions For Quality And Environmental Management Systems Certifications. Integral publication of this certificate is allowed. KEMA-Registered Quality, Inc. 4377 County Line Road Chalfont, PA 18914 Ph: (215)997-4519 Fax: (215)997-3809 CRT 001 073004 Accredited By: ANAB K2 Dyno REPLAY SYSTEM Quick Start Guide SOFTWARE VERSION 1.1 071-8681-00 JUNE 2009 Copyright Copyright © Thomson, Inc. All rights reserved. Printed in the United States of America. Portions of software © 2000 – 2009, Microsoft Corporation. All rights reserved. This document may not be copied in whole or in part, or otherwise reproduced except as specifically permitted under U.S. copyright law, without the prior written consent of Grass Valley, Inc., P.O. Box 59900, Nevada City, California 95959-7900. This product may be covered by one or more U.S. and foreign patents. Disclaimer Product options and specifications subject to change without notice. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Grass Valley, Inc. Grass Valley, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication. U.S. Government Restricted Rights Legend Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.277-7013 or in subparagraph c(1) and (2) of the Commercial Computer Software Restricted Rights clause at FAR 52.227-19, as applicable. Manufacturer is Grass Valley, Inc., P.O. Box 59900, Nevada City, California 95959-7900 U.S.A. Trademarks and Logos Grass Valley, K2, Aurora, Summit, Dyno, Infinity, Turbo, M-Series, Profile, Profile XP, NetCentral, NewsBrowse, NewsEdit, NewsQ, NewsShare, NewsQ Pro, and Media Manager are either registered trademarks or trademarks of Grass Valley, Inc. in the United States and/ or other countries. Grass Valley, Inc. products are covered by U.S. and foreign patents, issued and pending. Additional information regarding Grass Valley, Inc. trademarks and other proprietary rights may be found at www.thomsongrassvalley.com. Other trademarks and logos used in this document are either registered trademarks or trademarks of the manufacturers or vendors of the associated products, such as Microsoft® Windows® operating system, Windows Media® player, Internet Explorer® internet browser, and SQL Server™. QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license therefrom. Revision Status Rev Date June 17, 2009 4 Description Initial release of the K2 Dyno Replay System Quick Start Guide— 071-8681-00 K2 Dyno Replay System Quick Start Guide June 17, 2009 Chapter 1 Installation Unpack and check contents Find the following items in the packaging for the K2 Summit Production Client. PRODUCTION CLIENT us ra ra ss ss a a ll ll ro ro up up us us ss ss us us ss ss us us us ss us ss ss ss us ss ss ra us ra us ss ss ra ss ra ss ra ss ara ss a ss a ll ss a ll a ll ro a ll ro ll ro up ll ro up ro up ro up up up K2 SUMMIT Licenses and Warranties K2 Summit Production Client NOTE: Do not lose the Recovery Flash Drive that is stored inside the bezel. It contains the image for this specific K2 Summit Production Client. Release Notes Power cords Rack slides Documentation CD LTC cables Find the following items in the packaging for the K2 Dyno Controller. K2 Dyno Replay Controller Keyboard Mouse Documentation CD Licenses and Warranties Recovery Flash Drive G G ra ra ss ss Va Va lle lle y y G G ro ro up A A up q q A usd A usd q q A usd gA usd gsg sgq q A usd gA dusd g d sg s sg s q q A usd A dsd g d gq u q sg s sg s A G usd gA udsd gsg d G q ra sgq s s ra G ss G usdss gsg dussd gsg ds G rass V G rass g V d g d a ra sga s sg s ra ss Va lle ss Va dlle d s Va lle y GVa lle s y G lle y ro lle y ro y Gro upy Gro up G u G u ro p ro p up u p Power cord Release Notes NOTE: Do not lose the Recovery Flash Drive. It contains the image for this specific K2 Dyno Replay Controller. Gather additional items To complete a typical K2 Dyno Replay System, as referenced in this Quick Start Guide, you must provide the following items: • Two VGA monitors (1024 x 768 x 32 or greater) and cables • Video monitors and cables • Audio monitoring system • USB keyboard June 17, 2009 • Ethernet cable, either crossover or straight-through • USB mouse K2 Dyno Replay System Quick Start Guide 5 Chapter 1 Installation System overview The procedures and explanations in this Quick Start Guide assume a typical K2 Dyno Replay System, such as that illustrated in the following diagram. If your installation requires a different system configuration, apply the information in this Quick Start Guide accordingly. AppCenter Pro on K2 Summit Production Client SDI in (A ) C1 K2 SUMMIT PRODUCTION CLIENT C3 Record SDI Video/audio monitoring Play C4 C2 ) in (B PGM P1 (C) out SDI K2 Summit Client SDI ou PVW t (D) P2 Ethernet connection K2 Dyno Replay application VGA output K2 Dyno Controller 6 K2 Dyno Replay System Quick Start Guide June 17, 2009 Cable K2 Summit Client Cable K2 Summit Client If desired, mount the K2 Summit Client in an equipment rack. Refer to the K2 System Guide for rack mount procedures. Make K2 Summit Client cable connections as illustrated. Channels (C1, C2, C3, C4) are bi-directional Use C1 as record channel. Connect SDI in SDI IN1 SDI IN2 AES AUDIO SDI IN3 SDI OUT1 Use C2 as record channel. Connect SDI in SDI OUT2 LTC I/O SDI IN1 RS422 SDI IN2 SDI IN3 SDI OUT1 AES AUDIO C1 SDI OUT2 Use C3 as Use C4 as play channel. play channel. Connect SDI out Connect SDI out SDI IN1 LTC I/O RS422 SDI IN2 SDI IN3 SDI OUT1 SDI OUT2 AES AUDIO C2 LTC I/O SDI IN1 RS422 SDI IN2 SDI IN3 SDI OUT1 AES AUDIO SDI OUT2 LTC I/O RS422 C3 C4 OK OK ! ! GPI ~AC ~AC USB/1394 Power cord Keyboard and mouse 100BT/1000BT VGA REF. LOOP THROUGH VGA monitor Ethernet AES audio Power cord Each channel can be both an input (record channel) and an output (play channel). For the K2 Dyno Replay System documented in this Quick Start Guide, C1 and C2 are record channels and C3 and C4 are play channels. Cable K2 Dyno Controller Make K2 Dyno Controller cable connections as illustrated. Keyboard and mouse RS-232 100-240 V~ 4A 50-60Hz Power cord VGA monitor Ethernet The Ethernet connection between the K2 Summit Client and the K2 Dyno Controller can be via direct connect cable or via an Ethernet switch. June 17, 2009 K2 Dyno Replay System Quick Start Guide 7 Chapter 1 Installation Start up K2 Dyno Controller Open power switch door Press power switch RS-232 100-240 V~ 4A 50-60Hz There is no logon for the K2 Dyno Controller. Start up K2 Summit Client K2 SUMMIT PRODUCTION CLIENT Press standby switch Log on to the K2 Summit Client with the default Windows administrator account: • Username: Administrator • Password: adminK2 (The password is case sensitive) At first startup, End User License Agreements appear on the K2 Summit Client screen. Accept the agreements to continue. The Power LED goes on and stays on. The Service LED stays off. Startup processes complete in approximately two minutes and the K2 Summit Media Client is ready for connection and operation. 8 K2 Dyno Replay System Quick Start Guide June 17, 2009 Configure network Configure network On both the K2 Summit Client and on the K2 Dyno Controller, use standard Windows operating system procedures to configure a static IP address. IP addresses must be on the same subnet. You can also configure a host name if desired. June 17, 2009 K2 Dyno Replay System Quick Start Guide 9 Chapter 1 Installation Configure K2 Summit Client channels Configure channels according to your required formats and resolutions. 1 Open AppCenter and logon with the K2 administrator account. If a licensing message appears, refer to K2 Release Notes. 2 Click System | Configuration. A e nter AppCe 3 Click tabs, buttons, and scroll bar to locate settings. 4 Select from drop-down lists to make settings. 5 Click OK and Yes to save settings. For the default K2 administrator account, use the following to logon: • Username: K2Admin • Password: K2admin (The password is case sensitive) In Configuration Manager, click Channel and then select a channel tab to make settings for 2 record 2 play mode as follows: • Configure channels C1 and C2 as record channels. Make video and audio settings as appropriate for your input. • Configure channels C3 and C4 as play channels. Make video and audio settings as appropriate for your output. 10 K2 Dyno Replay System Quick Start Guide June 17, 2009 Monitor K2 Summit Client channels Monitor K2 Summit Client channels On the VGA monitor connected to the K2 Summit Client, you can monitor the four channels. In AppCenter, click View | Video Monitor Toolbar Full Screen Video Monitor K2 SUMMIT PRODUCTION CLIENT You can also double-click on a monitor area in multi-view or control screen to switch between views. June 17, 2009 K2 Dyno Replay System Quick Start Guide 11 Chapter 1 Installation 12 K2 Dyno Replay System Quick Start Guide June 17, 2009 2 Chapter Operation Start a new session Prerequisite: Dyno Server software must be installed on the K2 Summit Production Client. On the K2 Summit Production Client that you receive with the K2 Dyno Replay System, it is pre-installed. 1 On the K2 Dyno Replay, open K2 Replay Client y pla Re nt K2 Clie 2 Select Configure and Next 3 Select the K2 Summit Client and Next 4 Select a new session and Next 5 Select 2 recorders, 2 players and Next 6 Select C Player as primary and Start In approximately one minute the K2 Dyno Replay application should appear on the touch screen and on the VGA screen. Loop record can be set when you configure a Dyno session, and cannot be changed during the active recording session. Exporting HL clips and Playlists is best done in regular record mode (loop record off). June 17, 2009 K2 Dyno Replay System Quick Start Guide 13 Chapter 2 Operation View home page status 2 Check available 1 Select Home tab storage Select input and playout channels 1 Select A or B input 2 Select P1 or P2 (camera angle) playout PGM PVW P1 P2 M/E Send Goto To gang channels, press both P1 and P2 at the same time. For more information about channel operation modes, refer to “Channel operation overview” on page 25. 14 K2 Dyno Replay System Quick Start Guide June 17, 2009 Chapter 2 Operation Replay 1 Start Record (button lights red) al Loc e v Li Record channel starts recording PGM P1 PVW P2 M/E Send Goto 3 Play t Fas or 2 Jog to playback point Slo Mo playback Player channel program is controlled. Live/Local button Red al Loc e iv L = Live: You are watching the live video of the selected channel being recorded. Yellow = Local: You are controlling your replay in still, slow motion, or normal playout mode. l oca The recording of the live video continues L e Liv while you are in this mode. Shift button Clear ft Shi = Bottom function: For each button, the function shown on the bottom of the button label is currently active. Trim Take Yellow = Top function: For each button, the function shown on the top of the button label is currently active. Trim ift h S Take The Shift button also affects the function of controls displayed on the touch screen. Press A or B to switch angles during playout. Refer to “Controller buttons: Reference” on the inside back cover for more information on button functions. June 17, 2009 K2 Dyno Replay System Quick Start Guide 15 Chapter 2 Operation Capture highlight clip 1 Locate IN point 3 Locate OUT point 2 Mark IN Top In PGM 7 Change P1 highlight views* PVW P2 M/E Send Goto 6 View highlights on Highlight tab 5 Add highlight 4 Mark OUT to HL bin Lib Add L dd H A Btm t Ou *Highlight views on VGA monitor: Highlight clip plus metadata keywords Highlight clip plus thumbnail Highlight clips in table format 16 K2 Dyno Replay System Quick Start Guide June 17, 2009 Chapter 2 Operation Add metadata 2 Open the 1 Select highlight metadata screen 3 Name highlight 4 Select preset keyword names* 5 Assign stars (rating)* *Keyboard shortcuts: Rating - Ctrl + Space Name - Ctrl + 0 6 Select icon 7 Return to highlight screen You can pre-make metadata keywords with the Dyno Keyword Editor application, which you install on a separate PC. You then import K2 Dyno Editor files (XML) into the Dyno Controller using the IMP/EXP soft key on the Config menu. See Import page. June 17, 2009 K2 Dyno Replay System Quick Start Guide 17 Chapter 2 Operation Play highlight clip 2 Select a highlight 1 Select Highlight tab 3 Cue highlight ch MatUp Cue PGM PVW P2 P1 M/E Send Goto 4 Play highlight t Fas You can customize play operations as follows: • On the VGA monitor click Auto Cue. highlight, it is automatically cued up. Auto Cue In this mode, when you select a • On the VGA monitor click Auto Play. highlight, it automatically plays. Auto Play In this mode, when you select a • To configure play options on the controller touch screen, press Shift touch PLAYOPT. 18 Shi ft and then PLAYOPT TIMELINE K2 Dyno Replay System Quick Start Guide June 17, 2009 Chapter 2 Operation Create a playlist: VGA interface Click and drag highlights into playlist You can also move highlight clips within the playlist using the mouse. Create a playlist: Controller interface 1 Select Highlight tab 2 Select a highlight 3 Add highlight to playlist PL New PL Add On the controller touch screen, select the Playlist tab to see the highlight clip added to the playlist. June 17, 2009 K2 Dyno Replay System Quick Start Guide 19 Chapter 2 Operation Play a playlist with mix effects 1 Cue playlist (press 3 times) M/E PL + + M/E PL 2 Select mix effects M/E PL ft Shi + PGM P1 M/E PL PVW P2 M/E Send Goto 4 Skip to next highlight with mix effects Trim e Tak 3 Play the playlist with mix effects t Fas Additional controls for mix effects are as follows: • To select mix effects, press Shift M/E is on. Shi ft . The Flying M/E button lights green when • To configure mix effects, such as duration times and transition types, on the CONFIG tab touch M/E. M/E 20 K2 Dyno Replay System Quick Start Guide June 17, 2009 Chapter 2 Operation Import 3 Select 4 Touch External Clip IMPORT 2 Select CONFIG tab 1 Insert USB drive 5 Double-touch to open USB drive 1 1 1 6 Select a clip 7 Touch LOAD The clip is imported to V:\default You can also import keyword XML files using the IMP/EXP menu screen. You create these files with the Dyno Keyword Editor application. June 17, 2009 K2 Dyno Replay System Quick Start Guide 21 Chapter 2 Operation Export 3 Touch NETWORK 2 Select 1 Insert CONFIG tab 4 Touch USB drive ADD PATH K2 DYNO 5 Select USB drive 1 6 Touch OPEN 1 7 Touch/toggle to select ALL or PRIMARY 8 Touch APPLY 9 Select 10 Select HIGHLIGHT tab highlight clip 11 Press Shift 12 Press Send 22 Shi d Seno ot G K2 Dyno Replay System Quick Start Guide ft June 17, 2009 Chapter 2 Operation Manage bins 1 Select HIGHLIGHT tab 2 Open the bin screen 1 3 Browse up to see bins 4 Double-touch to open a bin 5 Rename bin. Use keyboard if desired. Touch < or > to navigate between bins. June 17, 2009 K2 Dyno Replay System Quick Start Guide 23 Chapter 2 Operation Shutdown K2 Dyno Controller 3 Touch 1 Select SHUTDOWN CONFIG tab 2 Press Shift ft Shi 4 Touch Close Session 5 Touch QUIT The Dyno controller application closes and the Windows operating system shuts down. You can also select RETURN TO INITIAL SCREEN rather than SHUTDOWN to close the current session and return the session start up screen. 24 K2 Dyno Replay System Quick Start Guide June 17, 2009 Chapter 2 Operation Channel operation overview The following sections explain channel operation modes. Standard mode 3 Record, 1 Playback/PGM K2 Summit Client Record Record Record Play C1 C2 C3 C4 P2 A B C D P2 PGM playout with transitions K2 Dyno Controller • The 3 Record and 1 Playback channel set-up is done when the session is configured at start-up screen • A,B,C angles can be selected for playback on the D (P2) channel • In this mode the P2 Player channel always illuminates red. Multichannel independent mode 2 Record, 2 Playback. Also known as “A-Side, B-Side”. Record Record C1 C2 A B Play Play C3 P1 P1 C4 Cue A or B angle on P1 or P2 channel. Playback independently P2 P2 Select either P1 or P2 button to control that playout channel. • The 2 Record and 2 Playback channel set-up is done when the session is configured at start-up screen • A,B, angles can be selected for playback on P1 or P2 • P1 and P2 playout channel content can be “swapped” by pressing buttons Fn then Take. June 17, 2009 K2 Dyno Replay System Quick Start Guide 25 Chapter 2 Operation Multichannel + gang mode 2 Record, 2 Playback. Player channels in sync. Record Record C1 C2 A B Play Play C3 P1 gang C4 P1 P2 Cue A or B angle on P1 or P2 channel. Playback independently then put in Gang mode. P2 gang Press both P1 and P2 buttons at same time to enter Gang mode. Press P1 or P2 to get out of Mutichannel mode. • The 2 Record and 2 Playback channel set-up is done when the session is configured at start-up screen • A,B, angles can be selected for playback on the P1, (C3) or P2 (C4) • Gang operation is based on Independent mode with selection of both channels and turning on gang Preview/Program mode 2 Record, 1 Playback/PGM, 1 Preview. Record Record C1 C2 A B Play Toggle Preview control mode on and off. Press Shift then PVW or PGM button C3 Play PGM C4 P1 P2 TAKE Cue A or B angle on Preview channel. PVW Press Take to put Preview cued point onto Program. • The 2 Record and 2 Playback channel set-up is done when the session is configured at start-up screen • A,B, angles can be selected for playback on the C Program (C3) and D (C4) Preview • In this mode, the PVW button illuminates yellow when PGM is selected. PVW lights green when selected and the Take button illuminates green to indicate ready for Take to PGM channel. • P1 and P2 playout channel content can be “swapped” by pressing buttons Fn then Take. 26 K2 Dyno Replay System Quick Start Guide June 17, 2009 Chapter 2 Operation Tips and shortcuts • To configure play options, press the Shift button and then on the touch screen select PLAYOPT. • To assign a rating (stars) to a highlight clip, use keyboard shortcut Ctrl + Space. • The Shift button toggles between the top and bottom functions, as labeled on the controller’s buttons. The Shift button also affects the function of controls displayed on the touch screen. • Use the Replay application displayed on the VGA monitor as a status screen. • You can adjust controller panel attributes, such as adjust the LCD and button brightness, from the Setup Screen. Press three buttons at the same time Fn ft Shi PGM P1 PVW P2 M/E Send Goto • • • • • June 17, 2009 Press Fn + Shift + Next to open the Setup Screen. You can adjust the speed, range, and other parameters of the jog knob and the T-bar. On the Config tab, touch < or > and then touch PLAY2 or PLAY3 to access screens with settings. You can lock/unlock the controller panel (buttons, jog knob, and T-bar) to prevent accidental operations. On the Home tab, at the bottom of the screen, touch OALOCK (On Air Lock). To play an angle from the beginning of the clip, press FN and then press A or B or C. Swap channels between PI and P2 playout channels by pressing Fn and then Take. Set T-Lever control and knob speed/response in Config menu, Play-2 and Play-3 tabs. K2 Dyno Replay System Quick Start Guide 27 Chapter 2 Operation 28 K2 Dyno Replay System Quick Start Guide June 17, 2009 Chapter 3 Problems and solutions The following table provides corrective action for some common problems. Problem Possible Cause Corrective Action Dyno Replay Controller can not connect to K2 Summit Client. Bad cable connection or network setup. Check network cable connections. At the Command Prompt, ping the network IP address. Play channel video output is periodically unstable in E-to-E mode. Video reference is not connected. If E-to-E mode is used, you must connect a video reference signal. The channel output is black in E-to-E, but playback is fine. Loss of input signal. Verify that you have a valid input signal. Audio level too high or too low Record or play channel audio level adjusted too low. In Summit AppCenter, use the audio level in recorder to adjust audio level. Use audio level adjust in player to adjust audio output level. Compression artifacts are present in the output. SD video data rate setting is too low for your program material. In Summit AppCenter, select higher SD video data rate. Digital video display device does not display properly. Wrong video output type selected for the Play channel. Verify and select video output type required by the display device (see display device manuals). June 17, 2009 K2 Dyno Replay System Quick Start Guide 29 Chapter 3 Problems and solutions Finding more information You can find the information you need in product manuals and elsewhere. K2 Dyno Release Notes and K2 Release Notes — The release notes contain the latest information about the software shipped on your system. The information includes software upgrade instructions, software specifications, software requirements, feature changes from the previous releases, and any known problems. Because release notes contain the latest information, they are provided as a printed document, rather than being included on the Documentation CD-ROM. K2 Summit Production Client Quick Start Guide — You receive this guide in the product packaging with your K2 Summit Production Client. The Quick Start Guide provides step-by-step installation instructions for basic installation and operation of your K2 Summit Production Client, including recording and playing clips. — Except for the release notes, the full set of support documentation, including this Quick Start Guide, is available on the Documentation CD-ROM that you receive with your product. The K2 Documentation CD includes the following documents: K2 Documentation CD • K2 Dyno User Manual — Provides instructions for configuring and operating the K2 Dyno Replay Application via the controller and the VGA interface. • K2 Dyno Service Manual — Contains information on servicing and maintenance. • K2 System Guide — Contains the product specifications and step-by-step instructions for modifying system settings. • K2 Summit Production Client Quick Start Guide — The Quick Start Guide provides step-by-step installation instructions for basic installation and operation of the K2 Dyno. • K2 AppCenter User Manual — Provides instructions for configuring and operating the media channels of the K2 Summit Production Client. • K2 Summit Production Client Service Manual — Contains information on servicing and maintenance. 30 K2 Dyno Replay System Quick Start Guide June 17, 2009 Grass Valley Product Support Grass Valley Product Support For technical assistance, to check on the status of a question, or to report new issue, contact Grass Valley Product Support via e-mail, the Web, or by phone or fax. Web Technical Support To access support information on the Web, visit the product support Web page on the Grass Valley Web site. You can download software or find solutions to problems. World Wide Web: http://www.grassvalley.com/support/ Technical Support E-mail Address: gvgtechsupport@grassvalley.com. Telephone Support Use the following information to contact Product Support by phone. International Support Centers Our international support centers are available 24 hours a day, 7 days a week. Support Center Toll free In country France +800 80 80 20 20 +33 1 48 25 20 20 United States +1 800 547 8949 +1 530 478 4148 Authorized Local Support Representative A local support representative may be available in your country. To locate a support center during normal local business hours, refer to the following list. This list is regularly updated on the website for Thomson Grass Valley Product Support (http://www.grassvalley.com/support/contact/phone/). After–hours local phone support is also available for warranty and contract customers. Region Telephone Asia China +861 066 0159 450 Hong Kong, Taiwan, Korea, Macau +852 2531 3058 Japan +81 3 5484 6868 Southeast Asia - Malaysia +603 7492 3303 Southeast Asia - Singapore +65 6379 1313 Indian Subcontinent +91 11 515 282 502 +91 11 515 282 504 Pacific Australia, New Zealand +61 1300 721 495 Central America, South America All +55 11 5509 3440 North America June 17, 2009 Country North America, Mexico, Caribbean +1 800 547 8949 +1 530 478 4148 K2 Dyno Replay System Quick Start Guide 31 Chapter 3 Problems and solutions Region Country Telephone Europe UK, Ireland, Israel +44 118 923 0499 Benelux – Netherlands +31 (0) 35 62 38 421 Benelux – Belgium +32 (0) 2 334 90 30 France +800 80 80 20 20 +33 1 48 25 20 20 Germany, Austria, Eastern Europe +49 6150 104 444 Belarus, Russia, Tadzhikistan, Ukraine, Uzbekistan +7 095 258 09 20 +33 (0) 2 334 90 30 Nordics (Norway, Sweden, Finland, Denmark, Iceland) +45 40 47 22 37 Southern Europe – Italy +39 02 24 13 16 01 +39 06 87 20 35 42 Southern Europe – Spain +34 91 512 03 50 Middle East +971 4 299 64 40 Near East and Africa +800 80 80 20 20 +33 1 48 25 20 20 Middle East, Near East, Africa 32 K2 Dyno Replay System Quick Start Guide June 17, 2009 June 17, 2009 K2 Dyno Replay System Quick Start Guide 33 Controller buttons: Reference 1 2 3 4 5 9 10 11 12 6 7 8 13 14 15 16 17 18 19 20 21 Create new playlist Add current selected item to PL as bottom event 12 Fn Add clip to Library type bin Add selected item to selected Highlight bin 13 Local Match to timecode point in record train Cue up current selected item 14 Enable Shift Function. On buttons, toggles between top and bottom functions. On touch screen, similarly toggles function of controls. 15 PGM Toggles Fast Jog on/off Play 16 PVW Open selected playlist Stop 17 M/E 7 Navigate to previous 18 Send 8 Navigate to next 19 Top Cue up beginning of clip Mark in point Change current angle to D Change current angle to A 20 Btm Cue up to end of clip Mark out point Change current angle to E Change current angle to B 21 Trim Trim HL or event in and out point Skip to next event in playlist. Swap video on preview channel and program channel, complete Trim function. 1 New PL 2 Add Lib 3 Add PL Add HL Match Cue Up 4 Shift 5 Fast 6 Open 9 10 11 ■ D A E B F C Change current angle to F Change current angle to C Live Brws Add Mrk P1 P2 PL Goto Take Invokes special functions Switch between local (playback) and live (record) Browse using knob Adds mark at current point Toggles Preview/Program mode Player 1 output channel selection Toggles Preview/Program mode Player 2 output channel selection Turn on/off Flying M/E (Lights green) Open Playlist page. If cue point not in PL, cue up last. If cue point in PL, cue up first. Send clip to preset path Go to selection, HL, TC • Pressing Shift then Live/Local returns to the Home screen. • For other buttons, the Shift button toggles between top and bottom functions. • To lock/unlock buttons, on the Home tab, at the bottom of the screen, touch OALOCK (On Air Lock).