Pipeline scada alarm management for Sport organisations

How to create outlook signature

Hello everyone my Name is Chad Smith  and today I'll be talking to you about   CIMPLICITY alarming. This is part 1 in  a series of Demonstration videos talking   about How to set up CIMPLICITY alarming  and use it. So, today we're just going to   do a simple setup of your first alarm  using the CIMPLICITY point Database. We'll start in the workbench and create  a new point, we'll call it Temperature. For the purpose of this demo, we'll be using it as a virtual point. Of course you can set   up alarms on device points and of different types.  Our temperature will be an Analog point.   We'll say that Normal operating Temperatures are around that,  say 15 degrees and we want to specify when we want, we want an Alarm indicating that, that Temperature  is out of an Acceptable range. So we'll give it an   Alarm message: check the temperature and this is  a really simple Alarm just using a level alarm. The limit is specifying what limits are in Alarm.  So if normal operating temperature is 15, we may   want to say that when the Temperature gets above  30 degrees Celsius it's getting too hot and if   it gets above 35 degrees Celsius that's way too  hot. So give that a high high Alarm, we also want   to say that if the Temperature starts getting  too low on our sensor, that we want to be warned   as well. So let's say minus 5 is getting a little bit  worrisome and even more worrisome as if it gets   below minus 15. So this sets up the parameters by  which the runtime will specify that this value is   in Alarm. So we'll do we'll create that point and  we'll go to our Cim edit screen that I've created. You can see that, I've already created a Alarm summary view and we will go ahead and bring in   a Temperature value, that we just created. Make it a little bit bigger and we'll set that   up, so that we can change the value. So we can  see the Alarm come into effect and we'll just   for now, we'll just make that an integer value. So, if we go to runtime you can see that we have a   number of Alarms already happening in the system. In subsequent videos, will show you How you can   filter those Alarms so that you see only of the  alarms that are pertinent to your situation or   to your user. For now we'll go ahead and show How  an alarm will happen if we get out of the bounds   We've configured for the temperature point so  15 is normal so there's no alarm right now if I   go ahead and say this temperature rose up to 36  degrees you can see that we get an alarm in our   Alarm summary. Add a high high level telling us to  check the Temperature if I bring that value back   down to the normal Operating range, you can see it goes into a Normal State but doesn't   leave the Window, because we've got our System  configured to require an operator to Acknowledge   an Alarm before it goes out of the queue. So if I  Acknowledge that alarm, you can see it disappears   and then if I go down to say negative 20 we'll see a low low Alarm appear and similarly we can   Acknowledge that and then when the alarm goes  back into a Normal Operating Range, it leaves   the system so there's your simple Alarm setup  with CIMPLICITY and we'll go into more details on some of more the more advanced alarming  concepts and CIMPLICITY in subsequent videos.