How To eSignature Texas Healthcare / Medical Document

When a client enters information (such as a password) into the online form on , the information is encrypted so the client cannot see it. An authorized representative for the client, called a "Doe Representative," must enter the information into the "Signature" field to complete the signature.

I want to get this done with my son and he is about 8. I have had help but I really don't want to pay someone $150-$200 for this. Thank you.A: It is not a difficult thing to do.The following instructions are adapted from the article in the February 2009 issue of the Ditchweed magazine. We have changed the language somewhat; you can read the whole article at First, get a good photocopy of the document or a printout. Use a pen and ink. (You can buy the pen and ink at a local office supply shop such as Staples or Office Max, or, if you have some money to spare, you can purchase a laser printer.)Put the printed page on a piece of cardboard (or some other transparent non-conductive material). If you plan on using a laser printer, make a sheet of paper that is about 1/4" thick at the left and 1/2" thick at the right side. Wrap the paper in a piece of bubble wrap. You can also tape it to a piece of cardboard.Hold the printed page or sheet in front of you. Put it so that the bottom edge of the paper is facing you. Make sure that the top and bottom edges of the paper are touching each other with about 5mm between.Now, put the top and bottom edges of the paper together, but do not press down firmly. Hold the paper tightly in place with your fingers.Now, put your index finger over the left corner of the printed page or page piece. Put your middle finger over the right corner of the printed page or page piece.Make a mark or a cross on the paper with your finger. This is...

How to download, open, print, send or view a document? If you don't know what you don't know, what do you think will happen? This is not the place for you to ask a question that you have never before asked. We have a policy in place that you cannot post a question asking for more info than what we already have posted.I'm still not sure how to get started, or I have a specific question for someone. What do I do now? Please contact me via email at [email protected]