Merge Countersignature Radio with airSlate SignNow

Forward countersignature radio

hello I'm going to show you how to configure Phoenix contacts radio line wireless system for simple io2 i/o communication without the use of software first configure one unit to master by setting the yellow thumbnail to zero one to read in the thumbwheel setting push the set button for one second next insert the cop stick into the s port and press the set button for one second this process sets a unique hop pattern to the wireless module we're going to configure the slave by setting the yellow thumb wheel to zero to two read in the thumb wheel setting press the set button for one second insert the cop stick into the S port of the slave to match the hot pattern of the master press the set button for one second to read in the unique hop pattern when the signal strength LEDs are lit you have completed your connection Phoenix Contact designed radio line to transmit IO and serial data when you need to transmit simple i/o add the required IO module to the slaves along with the corresponding IO module to the master for example on the t bus we can add a digital in module to the slave and a digital out module to the master to add these to the wireless network and map the i/o modules simply set an i/o map address using the white thumbnails on each il module set them both to the same number and press the set button on each wireless module enabling the detection of the i/o modules now configuration is complete io modules are mapped and we have quickly and easily configured a radio line system without using software for advanced radio line features and additional configuration options visit Phoenix Contact comms flash Radio line you