Merge Signature Service Radio with airSlate SignNow

Merge signature service radio

Pilot's Guide to the pj2 plus com radio we start by inserting six double a batteries into the alkaline battery pack it slides on the back and to turn the radio on I can spin the knob at the very top on the side of a radio we have a last frequency button a push to talk switch and then a backlight button if you want to keep the backlight on just hold it down for three seconds the radio beeps and now the backlight is on to enter a frequency in the radio just type in the frequency the frequency here at Claremont county is one two two nine seven five note that sometimes you'll have to enter in all three digits you'll notice that the last frequency that I entered is now in the last frequency slot I can switch back and forth between those two frequencies by using the flip-flop or last frequency button the easiest way to enter a frequency is to just type it into the keypad you can also adjust the frequency by using the up and down arrows to save frequencies I start by entering the frequency I want to save I can now hit the memory button and that brings up the memory mode I can save up to 20 different channels in the memory slots here and I can use the up and down arrows to choose the slot I wish to save on I had the double O slot selected now I can hit the memory button again and that saves my frequency into memory I can do that to all the frequencies I want to save now that I have several frequencies saved in memory I can recall them and that's done by pressing the recall button hitting the recall button goes into recall mode and now I can go up and down to the frequencies that I have saved hitting the clear button will exit the recall mode to edit my saved frequencies I can do that in several ways if I want to override a safe frequency I can do that by entering the frequency I want to save enter the memory mode and then select the frequency I would like to override hit memory again and now my new frequency will be saved in that slot if I would just like to delete a couple frequencies in there I can do that by holding the button clear and memory mem clears appears on the screen and now I can go up and down to whatever memory I want to delete in this situation 123 and then the zero button says mem clear underneath it so I hit 0 and it deletes that frequency from my memory if I want to erase all the memory channels in this radio I can do that simply by using this all clear that is listed underneath the clear button I start by turning the radio off then I can hold...