Print Countersignature Radio with airSlate SignNow

Print countersignature radio

hey welcome back to the print house guys and lucky frog print uh we got a customer job today for a uh hashtag magnetprint and uh so we decide we did it there um and uh cancer hits home to us so we're ending up doing uh the magnet for free and we're gonna give them a few extras for free sometimes we just give back you know we had a really one of the best days of sales so far with with our home stuff here and uh you know we get these jobs sometimes and sentimentally they just they they hit us you know it's a it's a heartfelt thing and um what turns out to be a hashtag magnet printed it's actually a teal and text so we decided to do uh some extra stickers and a towel so we use the beats rolling bt-12s we printed a towel and we're getting ready to uh press it like i said it's a bt-12 so we took it out we pressed it for uh 20 seconds on here that's it just for 20 seconds and then we're gonna we put it back in just so we could for the video sake and um so now she's going to take it out we're going to take it to the fusion iq that's how we've been uh curing them so there's the towel out of it and it looks great i put a shadow underneath here and we just did genstrom along the middle the stickers and the the hashtag are actually uh teal in the in their name and the word but we decided to use it black on this because it's on top of that so i'm gonna pause it and we're gonna uh we're gonna go over there and put it on the fusion iq to cure it so i'm gonna pause it so she's going to go ahead and lay it on the uh no go this way go along with that's the way the uh press is designed slide it out make it easier for you so we've used it a few times the fusion iq we love it it's great you fit everything off all the way off the edge all the way off the edge that way it gets a nice press in this area more so all the way off the edge i'm on this corner so then when it presses it it's just on the print there so she's going to go ahead and just press it down now we're doing at 300 at 44 seconds 144 seconds so um we found that this is perfect for our garment that won't scorch because um some stuff could scorch if you you put too much heat or too long so we're gonna go ahead and just uh seal it um for that 144 seconds and we're done so i'll pause it and come right back when it's done using the fusion iq guys this is like maybe our 10th time using it um we've done towels we've done a couple shirts but love it so far it's great all right so we're almost done we got uh 11 10 seconds left so yeah i mean like i was telling you we had one of the best days of sales since we started and uh we have to give back some time so i have three seconds it counts down and then it go ahead it goes in this uh state of uh alarm to tell you all the way lift it all the way up and that's it yeah it's really nice in the shadow here but yeah that's it so again this is printing from corel i'll do a video a full video explaining how we print from corel we're getting a lot of questions from people exactly how we're doing in the profiles and such but we find this process that we're doing is working really well for these roland bt-12s and uh washed has to come out so great but you can see that uh shadow looks like it's sitting on there you know so um corel to roll on bt12 uh and uh cured on our fusion iq heat press so thanks for watching guys like subscribe and uh hit that notification and uh share any videos really appreciate it guys see ya