Print Sign Required with airSlate SignNow

Digi sign printing quotation

it offers us a lot of flexibility in manufacturing science with short notice short runs different messages etc so here I've downloaded a file from the Road authorities website and I've just changed it so it will fit to print in the in the traffic yet and now it's ready to download into the rip software so now you can see the print is starting approximately five minutes after we sent it from the software now you can see the sign face coming out of the machine including crop marks and everything obviously you're very curious when it comes out so you make a visual check to see that everything is okay if we compare to how we had to work in order to have those kind of sign faces made prior to the traffic yet then we obviously had to screen print it and the process of getting where we are now in 15-20 minutes would be at least a day or two so it's very very different it's totally different when you print sign faces other print colors than black you need to over laminate it so step one is printing step two is over laminating and step three obviously cutting it now we're in the next step of the process which means over laminating the traffic yet well sign faces printed on the traffic yet needs to be over laminated unless they only have been printed with the black print you have the laminate up here which folds up so the waste rolls up here you put the material in here on a roll or a sheet depending how it is and it comes out here with a laminate on and as we said before laminating it takes no time whatsoever compared to printing when you load the machine all you know the media you just need to make some minor mechanical adjustments and then you do the rest on the screen then you need to find the first clip mark with the camera and when it's green you press ENTER and hopefully it will find the remaining tread marks automatically there we go you