Recover Countersignature Placeholder with airSlate SignNow

Assemble recover countersign

HELLO WINDOWS UNIVERSE. IN THIS VIDEO WE  WILL TALK ABOUT HOW TO RESTORE THE REGISTRY   USING COMMAND PROMPT IN WINDOWS 10. FOR A MORE IN DEPTH LOOK AT THE TOPIC,   WE WILL LINK AN ARTICLE IN  THE DESCRIPTION DOWN BELOW. FIRST THINGS FIRST, YOU WILL HAVE TO  RESTART YOUR PC UNDER THE ADVANCED STARTUP   OPTIONS. IT’S PRETTY EASY TO DO SO. CLOSE ALL  THE PROGRAMS THAT YOU HAVE RUNNING ON YOUR PC AND   OPEN YOUR WINDOWS SETTINGS. CLICK ON UPDATE &  SECURITY > RECOVERY AND YOU’LL FIND A RESTART   NOW BUTTON UNDER ADVANCED STARTUP. ONCE THAT IS UNDERWAY AND THE ADVANCED  STARTUP BLUE SCREEN SHOWS UP, CLICK ON   TROUBLESHOOT. THEN, SELECT ADVANCED  OPTIONS AND CLICK ON COMMAND PROMPT.   THIS IS GOING TO RUN COMMAND PROMPT  ON YOUR PC AS AN ADMINISTRATOR WITH   THE FIRST COMMAND-LINE BEING X:\WINDOWS\SYSTEM32. NOW, YOU NEED TO ACCESS THE DRIVE WHERE WINDOWS  IS INSTALLED. TYPICALLY IT’S THE C:\ FOLDER,   WHICH IS THE DEFAULT FOLDER UNDER ACTION EVERY  TIME THE COMMAND PROMPT IS OPENED, BUT SINCE   YOU’VE BOOTED YOUR PC IN A RECOVERY MODE, IT MAY  CHANGE TO D:\. TYPE THE FOLLOWING AND PRESS ENTER. D:\ YOU CAN MAKE SURE THAT YOU’RE IN THE  RIGHT DIRECTORY BY USING THE DIR COMMAND.   IF THE DIRECTORY SHOWS THE WINDOWS FOLDER,  AS SHOWN BELOW, YOU’RE GOING IN THE RIGHT   DIRECTION. IF NOT, YOU WILL HAVE TO  TRY BROWSING THROUGH OTHER DRIVES.   NEXT UP, TYPE THE FOLLOWING COMMAND TO  ENTER THE SYSTEM32 FOLDER AND PRESS ENTER. cd d:\windows\system32 NOW, YOU HAVE TO CREATE A FOLDER AS A TEMPORARY   BACKUP OF FILES ON YOUR CONFIG FOLDER. WE’RE DOING  THIS BECAUSE THERE IS A COPY OF REGISTRY FILES   IN THE CONFIG FOLDER TOO. TO DO SO, TYPE  THE FOLLOWING COMMAND LINE AND PRESS ENTER mkdir configBak THIS WON’T BE FOLLOWED BY ANY ACTION SINCE HERE  ALL YOU’RE DOING IS CREATING A BACKUP FOLDER.   COPY FILES INTO THIS FOLDER WITH  THE FOLLOWING COMMAND . ONCE   ENTERED, YOU WILL SEE 11-12 FILES BEING COPIED.  WAIT TILL THAT’S OVER BEFORE YOU PROCEED. copy config configBak TO MOVE BACK TO WORKING   WITH THE REGBACK FOLDER, WHICH  HOUSES A BACKUP OF REGISTRY FILES,   YOU HAVE TO USE THE ‘CD’ COMMAND AND  USE ‘DIR’ TO VERIFY ITS CONTENTS: cd config\RegBack WHILE GOING THROUGH THE DIRECTORY,  KEEP AN EYE ON THE FILES’ BIT SIZES.   IF ANY OF THE FILES SHOW 0 TO BE  THEIR SIZE, YOU ARE SUPPOSED TO   STOP THE PROCESS RIGHT THERE. CONTINUING  ANY FURTHER CAN CAUSE DAMAGE TO YOUR PC. ALL THAT’S LEFT FOR YOU TO DO IS COPY THE FILES  FROM THE CONFIG FOLDER TO THE REGBACK FOLDER. THE   FOLLOWING COPY COMMAND WILL FACILITATE YOU WITH  DOING SO. IN THE PROCESS OF MOVING THESE FILES,   YOU’LL BE ASKED QUESTIONS AS TO WHETHER OR NOT  YOU WANT TO OVERWRITE THE FILES. PRESS ENTER AND   THE Y KEY ON EVERY QUESTION TO CONFIRM. copy * ..\* ONCE DONE, CLOSE THE WINDOW BY PRESSING  ON THE ‘X’ ICON. AFTER THAT, YOUR   COMPUTER WILL START UP AND IF YOU  WERE...