Save Beholder Default with airSlate SignNow

Save beholder default

hello today we will explain you how to use our software safe and carry pro for Windows we will use a weekly time switch from our pro generation for the programming example the time switch application in the example is being used to control the lighting in a parking garage where the lights are supposed to be turned on at 7 a.m. and turned off at 9 p.m. repeated daily from Monday to Friday on weekends no switching times are required in the first step let's open the program safe and carry we had the icon on the desktop or we had a shortcut in the menu after the software has started or if the empty paper symbol in the menu bar has been clicked the proper time switch model can be selected in the selection menu that just opened up in our example we will choose the weekly time switch model SC 28 X 1 of Pro and accept our selection by clicking the OK button in order to generate the first switching command which is in our example the switching pond at 7 a.m. in the morning we have to click on the plus symbol in the menu bar in the window the chest opened we can first define a caption description for the switching command such as illumination garage parking lot on from Monday to Friday please note that this description is only used for a better overview within the project window on our computer and will not be visible within the time switch device itself now we select and tick the desired channel on which the current switching command shall be applied to in our example channel a the preset default parameters stand up and on /off in the section type and function don't have to be changed however we will tick the box on if not already active afterwards we select the days on which the switching command shall be active according to our example it would be Monday to Friday so let's untick Saturday and Sunday only as the last step we have to enter the desired switching on time in our example it is 7:00 a.m. after successful input and final verification of all parameters we can now close the programming window for the first switching command by clicking the ok button the first switching command is now shown in the overview window of the program in order to generate the second switching command which is in our example to switch off at 9 p.m. which equals 2,100 military time in the evening we have to click again on the plus symbol in the menu bar as already described earlier we can also define a caption or description for the second switch in command now we select and tick the desired channel on which the current switching command shall be applied to in our example again general a we keep the preset default parameters stand up and on /off in the section type and function but now select and tick the box off instead of on afterwards we select the days on which the switching command shall be active according to our example it would be Monday to Friday so let's untick Saturday and Sunday as the last step we have to enter the desired switching off time in our example it is 9:00 p.m. which equals 2,100 military time after successful input and final verification of all parameters we can now close the programming window for the second switch in command in the overview window we can now see all configured switching commands in our example there should be two commands displayed the overview shows the parameters such as the selected channels the switching function the switching time in the days when the commands are active in order to transmit the project of the switching commands to the data ki DK Pro we have to click on the menu bar symbol write project to data ki Pryor's response mission please verify of the programming adapter PP 50 or PP 60 are connected to your computer and also check if the DK pro data key is plugged into the programming adapter once above-mentioned steps are checked the project can now be transferred to the data ki by pressing the right button after the successful transfer the data key can be removed in blood into the time switch please note that the project needs to be loaded we had a menu of the times which before use the project can be saved on the computer for future usage in order to save the project click on the disk symbol on the menu bar and enter the desired project name for the file afterwards click the Save button the file is now stored in the selected folder that's it have fun programming although others which in commands with our safe and carry pro for Windows software