Scan Attestant Attachment with airSlate SignNow

Scan attestant attachment

Adjust the settings for the post & core case to be scanned. Select tooth 25 and set ‘Veneer’ or 'In(On)lay' for the type of tooth. EXOCAD does not have a separate [post & core] setting. Hence, we will use the [Veneer] or [In(On)lay] setting because the CAD modeling for [Veneer] or [In(On)lay] is most similar with that for [post & core]. Proceed with scanning. Scan model type – Model / Maxilla : Preparation teeth – Base / Post & Core - 15 / Mandibular Preparation teeth – Base / Click on the [Confirm] button after adjusting the settings. Place the maxilla base stone model and click on the [Next] button or the [Auto scan] button. You can check the object from various directions by clicking on buttons such as Front, Left, Right and Back. Scanning will proceed automatically and you will be able to see the scan data on the screen. If there are holes in the scan data, you can add scan data by clicking on the [Add scan] button. Once you are satisfied with the scan data, click on the [Next] button. Place tooth 15 on the base. Click on the [Next] button or the [Auto scan] button. Scanning will proceed automatically and you will be able to see the scan data on the screen. If there are holes in the scan data, you can add scan data by clicking on the [Add scan] button. Once you are satisfied with the scan data, click on the [Next] button. Place the mandibular on the scanner and click on the [Auto scan] button or the [Next] button. You can check the object from various directions by clicking on buttons such as Front, Left, Right and Back. Scanning will proceed automatically and you will be able to see the scan data on the screen. If there are holes in the scan data, you can add scan data by clicking on the [Add scan] button. Once you are satisfied with the scan data, click on the [Next] button. Place the maxilla and the mandibular on the scanner in the occlusion position and click on the [Auto scan] button or the [Next] button. Scanning will proceed automatically and you will be able to see the scan data on the screen. If there are holes in the scan data, you can add scan data by clicking on the [Add scan] button. Once you are satisfied with the scan data, click on the [Next] button. We will now move on to the impression scanning stage. Place the impression which contains the post and core in the scanner and click on the [Auto scan] button or the [Next] button. Scanning will proceed automatically and you will be able to see the scan data on the screen. If there are holes in the scan data, you can add scan data by clicking on the [Add scan] button. Once you are satisfied with the scan data, click on the [Next] button. You need to set the location of...