Electronic signature Presentation Myself

I was under cover as a mentally challenged, brain damaged individual. The client believed this private contractor hired to work on high end copy machines, was stealing these electronic boards worth $1,500 USD. This was in the early 90’s and it was challenging to install a surviellance video system for small jobs. So we came in with a plan to install a video camera in the small room where the boards were stored. However the battery had a limited life and we had to change it periodically without his knowing. I was supposed to be part of an equal opportunity program where I worked nights sweeping up and assisting in menial tasks.They felt he wouldn't be deterred by my presence since I wouldn't be smart enough to understand what he was doing. When the opportunity presented I would sweep on into the store room and then change the battery. I played the role to the hilt. He bought my act hook line and sinker. At times I would sit on the fork lift and pretend to be driving and make motor sounds with my lips. While bouncing up and down turning the steering wheel. He would just chuckle and ask if I was having fun. I just smiled back sheepishly. This went on all night and finally it was time to leave. He was concerned about leaving me alone there by myself. I explained I called for my ride from the home and they were on their way.On our way out we made small talk and I pointed to my head and said “brain damage”. He sounded very concerned and asked how it happened. I just said “accident”. Then he asked what I did for work before that. I said “"I was a architect”. He then said “Ohhhhh” as if he had just heard a very sad story. I went on “I did the green building downtown”. He said “"you mean the Emerald Building?” (A signature building in the San Diego Skyline at night). I said “"yeah that’s it”. Then he looked very sad for me shaking his head in concern as if a great mind had been lost. So I know he was buying the ruse all the way and I was having fun doing it. But after all was said and done, we didn't catch him stealing anything. But it was the best ruse I ever came up with in my work.

How is it possible that your car keys unlock only your car and not all the others? Is it theoretically possible that your key could unlock a second car somewhere on the world? With a digital key fob, you can use a number of combinations that effectively means your key fob will never open any other car. Each fob carries a serial number; if that serial number is, say, in the tens of billions, well, no car company has ever made seventy billion cars.With a physical key, there are only so many different combinations of high and low points in the key. The lock has a set number of tumblers, usually about five or so, and each tumbler can be set to one of a specific number of different heights.The physical locks Honda uses have a total of 3,500 possible combinations. That...

Unfortunately, many non-EEA nationals living in Germany need a visa to travel to the UK as a Schengen visa or German residency permit doesn’t allow entry to the UK. In this answer, I will try to explain the process of getting a Visa (tourist) for non-EEA nationals living in Germany.SEE ALSO: https://thehonest.blog/uk-visit-...Do I need a UK Visa?Before you visit the UK, the most important question you should ask is: Do I need a Visa? You can check if you need a UK Visa here: https://www.gov.uk/check-uk-visa/yFollow the simple steps:Select your countrySelect the intention for your visit to the UK. For example, if you want to visit the UK as a tourist, select “Tourism”Select if you will be traveling with or visiting either your partner or a family member in the UK. If you are traveling with or visiting either your partner or a family member in the UK, you will be asked to select if you have an article 10 residence card.What is an article 10 residence card? Read HereAfter following the above steps, you will be shown if you need a visa or not. In case if you need a visa, you will also be informed of the exact visa type you will need.UK Standard Visitor visaThis type of visa is valid for:visiting the UK on holidayto see your family and friends,do business (for example, conference, meeting, etc; but you CANNOT do paid or unpaid work),take part in sports or creative events, orreceive private medical treatment.Study for up to 30 days (as far as it is not the main reason for your visit)It is valid for up to 6 months from the date of issue and costs £93 (as of Sept. 2018), excluding User pay fee (£59) and fees for any selected Value added services at TLScontact. The last time I applied for a UK standard visitor visa (July 2018), I paid €176 including User pay fee and an additional €30 for express courier return (value-added service).UK Visa type: Standard VisitorFees (as of Sept 2018): Visa Fee: £93, User pay fee: £59Validity: Up to 6 months (multi-entry)Earliest you can apply: 3 months before the intended date of travelAverage processing time: 2~3 weeks (maybe longer during the rush season)Visa centers in Germany: Düsseldorf, Munich, BerlinHow to apply?Go to https://www.visa4uk.fco.gov.uk/h... and create an account (if you don’t have one already; otherwise log in to your existing account).Login into your visa4uk account and select: “Apply for myself” – if you are applying for yourself “Apply for someone else” – if you are applying for a family member or a friendFill in the form that appears. Make sure you fill in all the details as mentioned in your passport and other supporting documents. You may see a notification that says “Please note there is an additional fee…”. This refers to the User Pay fee mentioned above.Select the visa type, that was suggested by https://www.gov.uk/check-uk-visa/yNote the reference number starting with “GWF”. It will be needed later on.Now select “Create application”Now select “go to application” and fill in all the details thoroughly.Sign the declaration (Electronic Signature)Book an appointment (You will have to select a location from Düsseldorf, Munich or Berlin). In my experience, Düsseldorf has the fastest processing time. You can check the visa processing times here: https://visa-processingtimes.hom...Pay the visa fee (~ €176 in Aug 2018). There are many options to pay the visa fee like PayPal, Master/Visa cards, Maestro cards, etc. Note: If you want to withdraw your application, you may only get a full refund of visa fee if you cancel the appointment and submit a written request at least 5 days before your scheduled appointment.Once the payment is successful, go to https://uk.tlscontact.com/de/dus...Select the same location from step 8 at TLScontact website.Click register (if you don’t already have an account). Otherwise login into your existing account.Click “Add an applicant” (Blue button at bottom of the page).Enter the GWF number from “step 5”, all other details as mentioned in your passport.If you select the return courier service, it will cost you €30 in addition. If you don’t select this service, you will have to come back to the visa center to pick up your passport after the visa is issued (or rejected). I would highly recommend this service if you don’t live near one of the visa centers.A list of Required Documents is mentioned here: UK visit visa for Non-EEA nationals living in Germany - The Honest BlogVisa appointmentYou and every who is applying with you (friends/family) have to be present in person.Carry all required documents in original (to be on the safer side) and a photocopy (A4 size). In case you forget to get a photocopy, most visa centers have a photocopying machine (but they charge as much as 50 cents per copy).Arrive at the visa appointment location 15 minutes in advance.Don’t carry too much luggage or any dangerous items – your bags will be checked before allowing you to enter in.In case if you have opted for courier return for your passport, you may be asked to fill an additional form confirming the return address.Once your name / GWF number is called, you have to submit all the documents followed by biometrics (fingerprints and photo will be taken). Note: There are no British officials present at the time of document collection. There will be no formal visa interview. You will not be asked any questions (only document collection). The TLScontact representatives will blindly collect the documents you provide them. They will not tell you if something is missing or is extra. It is your duty to make sure you provide all the documents you want to be considered for your visa process (There is no harm in providing an extra document, but failing to provide even a single required document can result in a rejection). Note: Make sure you have don’t have any tattoos (like Henna) on your fingers that will hamper them from obtaining fingerprints.TLScontact will retain your current passport and copy of all the documents. You will be given a TLScontact checklist (Example below) and sent a confirmation email as well.This is the end of the visa application procedure. Note: There are some paid value-added services that allow you to apply and keep hold of your passport during the decision making process. You will have to submit the passport at a later point in time for visa stamping.Normally, after 2-3 weeks you will receive a notification email that your passport is ready for collection. You can track the progress of your visa on TLScontact website.Passport collectionIf you have opted for express courier return, you will receive your passport by courier (Usually it is sent by DHL express. You have to be present at home to collect it as a signature is needed. It is not delivered to neighbors or Packstation).If you have opted for express courier return, you will need to go the visa application center with the following documents to collect your passport (once you receive a confirmation that the passport is ready for collection):TLScontact checklist.Original and photocopy of a Photo-ID (for example: Driving license or Aufenthaltstitel).If collected by someone else, they will need original Authorisation form and representative’s valid photo ID document (copy & original) in addition to the above two documents.If collecting for a minor, a copy of the birth certificate is required.

I have to disagree with many of the answers above. The Arjun MKI & II are both very disappointing vehicles, with signNowly reduced capabilities compared to other modern third and fourth generation MBTs.Let´s start with mobility:The Arjun MkI is powered by a German MTU MB 838 Ka-501 diesel engine. This engine is a modernized version of the MTU MB 838 CaM 500 multi-fuel engine that was first fitted to the Leopard 1 MBT in 1965. Thanks to various upgrades, and the addition of a supercharger, the Ka-501 can signNow 1400 hp while the CaM 500 can only signNow 800 hp. So fans of the Arjun MBT (and its manufacturer) would have you believe that this tank has excellent mobility thanks to a hp/weight ratio of 23,5 (slightly below average for a modern MBT but still within acceptable norms). However, raw engine power is only one of the factors that determines a tank´s mobility. The problem is that because of its outdated design, the Ka-501 engine is big,  heavy, extremely fuel inefficient (a pitiful 200km range on good terrain while other MBTs can easily signNow 500 km) and has very poor performance in terms of rpm and torque. These problems are worsened by the vehicles heavy weight (58 tons for the MkI and 68 for the MkII, the heaviest MBT in the world), meaning that the Arjun struggles to crest even a slight hill.Big, heavy, and terrible fuel efficiency...The current version of the MkII still uses the same outdated, crappy engine, although there are plans to upgrade to a modern American Cummins engine coupled with a French suspension. So far, these plans have yet to materialize. Protection: On paper, the Arjun´s armor is supposedly quite good. On paper.The manufacturer of the Arjun MBT claims that its "Kanchan heavy composite armor" is on par to the British Chobham armor from which it was developed. The Arjun MkI&II can also use locally manufactured ERA blocks, said to equal the performance of Russian Kontact-5 ERA from which they were developed as well. So theoretically, the Arjun´s armor uses excellent materials. The problem here is the design of the armor itself. The arjun´s gun shield is signNowly thinner than other modern MBTs. In addition, the primary gunner sight does not have a extra armor module.Notice how the left side of the turret is completely bereft of any composite armor (those white layers on the other side of the turret front). The gunner sits behind 250mm of spaced steel armor, and that´s it. Any modern APFSDS round will cut through that like it´s butter and vaporize the gunner.Notice the huge weak spot created by the primary gunner sight.So the turret front is terrible. But the turret sides are even worse. Notice how the vaunted "Kanchan heavy composite armor" (the white layers of armor) leave 2/3rds of the turret sides exposed. The turret sides of the Arjun I&II are literally paper thin. Worse, contrary to what the manufacturer claims there are no blowout panels on the Arjun MBT, nor is it equipped with a separate ammunition compartment. Where is that separate ammo compartment you´ve been talking about?This means that virtually round penetrating the turret will ignite the tank´s ammunition and vaporize it in a big fireball.Moving on...Firepower:If you thought the Arjun was a bad tank before, you haven´seen anything yet.The Arjun MKI&II both use the same gun: a 120/55 mm rifled gun inspired by the British L30 rifled tank gun used by the British Challenger 2. Proponents of the tanks will tell you that because the gun is rifled, it is more accurate than the smoothbore guns used on the Abrams or the T-90. That´s bullshit, to put it simple.A rifled gun applies a spinning motion to the round it fires, meaning those rounds will be more stable when travelling through the air and more accurate over range. However, modern ammunition doesn´t need a rifled barrel to be accurate and stable, since they are equipped with little fins at the end of their penetrator, that apply a spinning motion to the round as it travels through the air. Put simply, modern ammunition spins itself, and doesn´t need a rifled gun to be accurate.Notice the little fins at the end of the round.Therefore, the claims that the manufacturer makes about the gun´s accuracy are very doubtful at best. It is claimed that the Arjun has a First Hit Probability (FHP) of 90%, even on the move, thanks to an excellent stabilizing system and Fire Control System (FCS). Comparative trials were conducted between the Arjun MkII and the T-90, where it was claimed that the Arjun MkII outperformed the T-90.However, Indian Army Generals have since come out to say that those trials were rigged by corrupt defense officials, and that the accuracy of the Arjun MBT is vastly overestimated.But the worst of all is the penetrating power of the Arjun´s main gun. At 2km, a round fired by the Arjun can only penetrate 300mm of Rolled Homogenous Armour (RHA).This is pitifully bad. At 2km, this tank won´t even be able to penetrate the side armor of most modern MBTs. As a comparison, most modern APFSDS rounds can penetrate between 700 and 900 mm of armor at 2 km. That´s 3x the penetration of the Arjun. The poor penetrating power of the Arjun is attributed to poor materials used for the penetrators, a low-pressure firing chamber and a short penetrator length.Soooo, if we recap:The mobility of the Arjun is terrible. Its armor is virtually non-existent with huge weak spots all around the turret, and its gun is horrendously inadequate by modern standards.There is a reason why even the Indian Army refuses to use the bloody thing. Only 100-200 Arjuns have been ordered to placate the government and DRDO (the Arjun manufacturer), while the Army relies on 1250 T-90 and 2500 T-72 MBTs.

Answer is based considering Mk-2.A comparison table:ARMOR: It is comparable to any western tank and better than the T-90S. It consists of ERA Mk2 and Kanchan composite Armor. Arjun can take a point blank hit from T-72. demonstrated the capability to defeat HESH and APFSDS rounds, which included the Israeli APFSDS rounds.A new honeycomb design of Non-Explosive and Non-Energetic Reactive Armour (NERA) along with nuclear, biological and chemical (NBC) protection equipment is present on Mk2. Entire Electronic protection suit (LWR, RWR, Laser dassler, EW Jammers). Arjun Mk2 uses a Mobile Camouflage system to reduce it’s signature made by DRDO, same is used on T 90S as well. All this active and passive protection systems are on par with any modern western tank.FIREPOWER:It has a 120 mm rifled cannon which will be replaced by a smoothbore in upcoming HNS Mk2. Missile firing capacity is only in Merkava, T 90 and Arjun. Arjun uses Indigenous DRDO CLGM. Also a Themobaric Round has been made for Arjun Mk2 which is superior to any ammunition as of now. It also has BEL made 12.7mm RCWS and Includes Friend-foe identification device.Includes Day/night, thermal capable panoramic vision. So firepower is at par with any western tank.Moreover Arjun can Fire easily while moving at 25Km/hr whereas T-90S can do only upto 16 Km/hr.VECTRONICS: However, the area that will see the Arjun Mk.2 emerging as a true new-generation MBT will be vectronics, and in particular the battlespace management system (BMS), which has been designed to operate at the unit-level and below, and which will synthesise the battlespace situational awareness picture for the unit commander, whether it be a mechanised infan­try regiment or an armoured regiment. The MBT and selected infan­trymen will thus become situational awareness platforms. Vectronics of Arjun Mk-2 are part of BMS(Battlefield Management System which was derived from F-INSAS) lateron these system will be integrated in APCs, IFVs and T72/90s.Arjun and several prototypes of TATA kestrel(Ordered as pilot project) are the first to get test the BMS based network centric system. Hence Arjun is more Network Centric and have better situational awareness than any other tank in IAs inventory.CONTROVERSIAL TOPICSArjun had been the centre of criticism only for one reason Weight.Arjun Mk2 when fully loaded is 68 ton.Similarly:Challenger fully loaded= 72.5 TonLeopard=63 TnMerkava=65 tonM1A2 fully loaded=72 tonWhat needs to be realised is that whenever we talk about weight and start abusing and criticising the Arjun as “Overweight Fat pig” when ground pressure of Arjun Mk2 is less than T-72, it is not the tank’s fault rather the theory on which it is built . All other tank the IA uses are Medium Battle Tank hence lower weight which emphasises on mobility but the western tanks are based on supreme firepower with robust protection and crew comfort hence the weight, the same theory on which Arjun is made.Also as of now Arjun is the only tank in IA inventory to have AC for the crew, T-72 CIA got ot later and T-90 was to be done but Russia had objections with same. Needless to say the major motivation behind it was to face the Pakistani M1A1 Abrams which was then offered by US to Pakistan but never made into Pakistani Inventory.But we need to see the tank as a whole ecosystem which consists ofRoads it will travel in it’s host countryMaximum capacity of local bridges can takeAll other assets to make it cross ridges rivers like (ARV, BLT,trucks and wagons etc).While the last has been taken care by DRDO and other agencies, the civilian Roads and bridges have way less capacity than 60 ton(Approx Deassembled weight of Arjun). Needless to say the normal roads are made not even keeping in mind about the civilians, you will find a big pit within a fortnight, imagine the condition of road just after a 68 ton beast rams over it. Only National highways are capable of carrying Arjun’s weight. In other terms Arjun might be ready but India’s Road network doesn’t seems in a mood to do so. Unlike in developed country where the max load of these roads are set keeping in mind their strategic importance.Arjun Train Wagon:Arjun On truck:Arjun Bridge:Arjun BLT:Future Upgrades underway:1.Use of HNS(High Nitrogen Steel) made by DRDO and produces by Jindal Steel Hisar to bring weight to 50–58 ton range.2.New hull and turret are designed in collaboration with Dynamatic technologies and Alicon group and TATA power SED.3.New Bharat powerpack 1500 HP instead of existing 1400 Hp (Below pic : Test rig).4. Integration of indigenous APS, as of now Israeli APS can be used on Mk2 if needed.5.New 120 mm Smoothbore cannon.CONCLUSION:Firepower, Protection, Situational awareness, Electronic Warfare: Arjun Mk2 is comparable to any western tank if not better.Logistics: Arjun is as weak as any western tank if moved inside India, even western tank will face problems in transportation in India, let alone Arjun. For that the motor roads have to be constructed accordingly.Pic Credits: Trishul-trident, DFI, DRDO tech focus and Google and Myself.Literature: Trishul-trident

Thanks for A2AAnswer is based considering Mk-2.A comparison table:ARMOR: It is comparable to any western tank and better than the T-90S. It consists of ERA Mk2 and Kanchan composite Armor. Arjun can take a point blank hit from T-72. demonstrated the capability to defeat HESH and APFSDS rounds, which included the Israeli APFSDS rounds.A new honeycomb design of Non-Explosive and Non-Energetic Reactive Armour (NERA) along with nuclear, biological and chemical (NBC) protection equipment is present on Mk2. Entire Electronic protection suit (LWR, RWR, Laser dassler, EW Jammers). Arjun Mk2 uses a Mobile Camouflage system to reduce it’s signature made by DRDO, same is used on T 90S as well. All this active and passive protection systems are on par with any modern western tank.FIREPOWER:It has a 120 mm rifled cannon which will be replaced by a smoothbore in upcoming HNS Mk2. Missile firing capacity is only in Merkava, T 90 and Arjun. Arjun uses Indigenous DRDO CLGM. Also a Themobaric Round has been made for Arjun Mk2 which is superior to any ammunition as of now. It also has BEL made 12.7mm RCWS and Includes Friend-foe identification device.Includes Day/night, thermal capable panoramic vision. So firepower is at par with any western tank.Moreover Arjun can Fire easily while moving at 25Km/hr whereas T-90S can do only upto 16 Km/hr.VECTRONICS: However, the area that will see the Arjun Mk.2 emerging as a true new-generation MBT will be vectronics, and in particular the battlespace management system (BMS), which has been designed to operate at the unit-level and below, and which will synthesise the battlespace situational awareness picture for the unit commander, whether it be a mechanised infan­try regiment or an armoured regiment. The MBT and selected infan­trymen will thus become situational awareness platforms. Vectronics of Arjun Mk-2 are part of BMS(Battlefield Management System which was derived from F-INSAS) lateron these system will be integrated in APCs, IFVs and T72/90s.Arjun and several prototypes of TATA kestrel(Ordered as pilot project) are the first to get test the BMS based network centric system. Hence Arjun is more Network Centric and have better situational awareness than any other tank in IAs inventory.CONTROVERSIAL TOPICSArjun had been the centre of criticism only for one reason Weight.Arjun Mk2 when fully loaded is 68 ton.Similarly:Challenger fully loaded= 72.5 TonLeopard=63 TnMerkava=65 tonM1A2 fully loaded=72 tonWhat needs to be realised is that whenever we talk about weight and start abusing and criticising the Arjun as “Overweight Fat pig” when ground pressure of Arjun Mk2 is less than T-72, it is not the tank’s fault rather the theory on which it is built . All other tank the IA uses are Medium Battle Tank hence lower weight which emphasises on mobility but the western tanks are based on supreme firepower with robust protection and crew comfort hence the weight, the same theory on which Arjun is made.Also as of now Arjun is the only tank in IA inventory to have AC for the crew, T-72 CIA got ot later and T-90 was to be done but Russia had objections with same. Needless to say the major motivation behind it was to face the Pakistani M1A1 Abrams which was then offered by US to Pakistan but never made into Pakistani Inventory.But we need to see the tank as a whole ecosystem which consists ofRoads it will travel in it’s host countryMaximum capacity of local bridges can takeAll other assets to make it cross ridges rivers like (ARV, BLT,trucks and wagons etc).While the last has been taken care by DRDO and other agencies, the civilian Roads and bridges have way less capacity than 60 ton(Approx Deassembled weight of Arjun). Needless to say the normal roads are made not even keeping in mind about the civilians, you will find a big pit within a fortnight, imagine the condition of road just after a 68 ton beast rams over it. Only National highways are capable of carrying Arjun’s weight. In other terms Arjun might be ready but India’s Road network doesn’t seems in a mood to do so. Unlike in developed country where the max load of these roads are set keeping in mind their strategic importance.Arjun Train Wagon:Arjun On truck:Arjun Bridge:Arjun BLT:Future Upgrades underway:1.Use of HNS(High Nitrogen Steel) made by DRDO and produces by Jindal Steel Hisar to bring weight to 50–58 ton range.2.New hull and turret are designed in collaboration with Dynamatic technologies and Alicon group and TATA power SED.3.New Bharat powerpack 1500 HP instead of existing 1400 Hp (Below pic : Test rig).4. Integration of indigenous APS, as of now Israeli APS can be used on Mk2 if needed.5.New 120 mm Smoothbore cannon.CONCLUSION:Firepower, Protection, Situational awareness, Electronic Warfare: Arjun Mk2 is comparable to any western tank if not better.Logistics: Arjun is as weak as any western tank if moved inside India, even western tank will face problems in transportation in India, let alone Arjun. For that the motor roads have to be constructed accordingly.Pic Credits: Trishul-trident, DFI, DRDO tech focus and Google and Myself.Literature: Trishul-trident

During my divorce I did the majority of the writing, paperwork, and delivery to save costs. Since saving cost was part of the reason I got quite creative with process serving. In the local court rules (every court jurisdiction has their own rules) there were only two restrictions. You couldn't do it yourself. The person signing that they did it had to be over 18 years old. There was no verification. There was no identification. There was no requirement that they show up to court to prove anything. A signature on the court approved form said they were over 18 and they delivered some papers. Good to go.My ex's attorney was doing her best job to raise billable hours and delays in the process. At some point in time she had made a mistake and brought a motion to an ex-parte court (only one party needs to be present ex-parte). The ex-parte court overlooked that this motion could only be ordered ex-parte with my signature on an agreeing form. I didn't agree! I got notice she did this on a Friday through the courts electronic forms processing. I couldn't see what she did until Monday. Because of other rules and process I only had that day to correct it. I didn't even get a certified copy until Tuesday!I didn't have time to go home and study it. I didn't have time to get legal help. I hammered it out on my laptop in the court lobby, printed it at Kinko's a block away, and then had another conundrum. Attorney's are supposed to make a good faith effort to tell the other party about ex-parte motions. Of course she didn't do that for me, but I was going to for her. I printed another set of complete documents that would move her motion from ex-parte to our actual assigned judge on the required 14 day calendar. A cover sheet explained this was my good faith message about an ex-parte action, and also moving her motion to the motions calendar.This would require a process server. I'm running out of time. I can't do it myself. The other attorney's office is across the street from the Kinko's in the downtown core.This is the epic part, and just revenge for the (dis)honest mistake and wasting my day. I walked outside the courthouse, found the stinkiest, liquor drenched bum I could find. I paid him $10 to go to her office, of a major law firm, in a top story of huge skyscraper, and deliver them and sign the paperwork saying he did it. I accompanied him, told the building lobby attendants he had legal business there and showed them her business card. Up the elevators, walked past the receptionist for the firm who just sat there open-mouthed. Same thing “he has legal business with ”. Down the hall, she was in a meeting with other attorneys. So he walked right in, dropped off the papers, now loaded with his stench, the other attorneys are backing away wondering what the hell, and I said “see you in 30 minutes if you object.”I made it back to the courthouse and to the ex-parte court in time to explain the error, the corrected paperwork, get a revised order canceling her order, and putting everything on the 14 day calendar. The accepting clerk asked if this had been served. Yes, here you are: a Service of Process document, properly signed by a drunk, snaggletoothed, unbathed bum.The 14 day extension gave me enough time to write a valid objection and her motion was denied. The actual issue was of little importance except it inconvenienced me. It would have been a pretty routine temporary change in a six year custody battle. She got petty about it, and I got petty back in spades.

BJP is on a roll and AAP on a reverse roll.The public voted against AAP in anger towards their ambition in having a finger in every pie while not acknowledging that the Delhi pie was getting out of their hand and the very electorate that had brought them in was now turning against them - in part for unfulfilled promises, in part for disgust at the electioneering strategy which was aimed more at Modi mudslinging while it could have been more positive, in greater part in the 'belief' that a vote for BJP is a vote for Modi.As though Modi is '42′ - the answer to every question.So, No. EVMs were not tampered with.AAP did not make the cut. The sooner they face the truth, the better for them.Do I believe the tampering allegations? No. Not until they can accept the challenge and prove that they have a point.Until then, I shall go with...AAP lost because people didn't vote for them.AAP lost because they lost focus.AAP lost despite the fact that BJP MCD has been screwing up Delhi for a decade.AAP lost because they didn't leave Modi out of their negative campaign.AAP lost because they could have shown the faces of the current MCD.AAP lost despite an inept Manoj Tiwari heading an incoherent Delhi front.AAP lost a battle because it didn't sufficiently work on the war it had won.AAP lost due to its battle against the media.To cut a long story short, AAP lost for every reason other than EVM tampering.This bleat sounds like a kid who has messed up his answer sheet and blames the teacher for his poor marks.